Drill Jigs

NEW!!! Peterson Carbide Coring Tool: $224.95

Peterson does it again! Introducing the Peterson Carbide Coring Tool. We'll open them...you put them back together again! Peterson's new set of vending lock penetration tools make quick work of many vending type lock openings including Van, ABA DUO, Abloy, Baton, 380 Tubular, 360 Tubular, and 340 Tubular. This kit includes drill, drill bit, 7 types of adaptors to fit the above vending type locks with adaptor guides with preset cutting depth to insure success every time!

Mortice Cylinder Drill Jig: $29.00 NEW LOWER PRICE!!

Why worry about closed keyways, recessed cylinders and guard collars? High security cylinders and glue-filled locks are a problem no more. Currently mortise set screws are not protected on even the best high security locks. Our state of the art drill jig enables the security professional to remove mortise cylinders with ease. Easy to use in so many ways: Drill the set screw out of almost any mortise lock and easily remove the cylinder without damaging the cylinder, door, or lock mechanism. No more worries about decoding high security cylinders or replacing hard-to-find keyways. Drill a small access hole in doors using Adams-Rite type swing bolts and use the included “Push Tool” to release the swing arm. Cover the hole with our stainless steel spacer washers for better-than-original security. Use the same access hole and “Push Tool” on Adams-Rite style latches, to release the double locking feature, and slip the latch with our Adams-Rite Slim Jim (ARSJ) or By-Pass Shim (CBS-SHIM). Got a recessed cylinder, protective escutcheon or guard rings? Go in after it! Turn the drill jig around and drill away. Our Drill Jig Set comes with everything you need to do the job: 1 “Push Tool,” 1 #12 high-speed drill bit and 4 Assorted Washers.

6 Piece Spare Mortice Drill Jig Washer Set: $22.00

We are so sure you will be getting so much use out of your Peterson Mortice Cylinder Drill Jig, we proudly offer this replacement set of 6 high quality stainless steel washers. Use wherever extra security around a rim cylinder is needed.

Spare Push Tool: $8.00

Stay on point with our replacement push tool for your mortise cylinder drill jig. This push tool works best when sharp. For when yours is worn out or lost, here is another with new factory edges.

I-Core Drill Jigs

Small Format I-Core Drill Jig: $185.00

You asked for it - You got it!

Why does Peterson manufacture the most useful tools for security professionals? We ask the locksmiths what they need. And when you told us you needed an I-CORE drill jig that was easy to use, would NOT DAMAGE DOOR HARDWARE and would allow you to DECODE THE CYLINDER, that’s just what we made! Here it is: The small format I-CORE drill jig that beats them all! No control key? No Problem! Damaged Core? No Problem!  Made of  hardened tool steel, this fast and efficient instrument is ready to use the way YOU need it. Drill out the control shear line with surgical precision for those one-time removals. Or shear off the I-CORE locking lug from within the core profile on all brands of "Best Type" I-CORE cylinders, with no damage to door hardware. An untouched pin stack means that the core can be decoded for control and master keys. Think about all the door hardware and I-Core locks you can save. Turn a multi-drill job into a one-drill wonder with the Peterson I-Core Drill Jig. Packaged in a compact tube type case, the tool comes with complete instructions and our top quality drill bits and guides. You provide the drill and the key blank (or any key for that keyway) to complete your core-busting arsenal.

Spare Drill Bit Set: $20.00

Provided for you as a replacement set for the custom drill bits found in our I-Core Drill Jig (IC-DJ), Peterson’s high speed drill bits work wherever precision drilling is needed. Our Drill Bit Set contains 1 Large Drill Bit, 1 Small Drill Bit and 1 Alignment Pin. Don’t be caught without a spare!

Corbin/Russwin Removable Core Drill Jig: $175.00

Work with Large Format I-Cores? Peterson has expanded our technology that allows damage free (to the lock) removal of small format interchangeable cores (I-Cores). We now offer the same advantages for large format cores. You can now remove Corbin/Russwin large format cores without destroying the pin stack. This means the core can be decoded and control keys cut for the entire system. Remove damaged cores with ease and precision.

Sargent Removable Core Drill Jig: $170.00

Peterson now provides the means to remove Sargent large format cores without destroying the pin stack or the lock housing. This means the core can be decoded and control keys cut for the entire system while not sacrificing the housing. Remove damaged or vandalized cores with ease and precision.

I-CORE SLAM HAMMER Price: $55.00

Whether you use a Peterson I-Core Drill Jig or just need a slam hammer on other occasions, the Peterson Slam Hammer is designed to throw its weight where it counts the most. With its hefty weight and hardened one-half inch bolt, this sturdy tool is designed to give you the force you need, from a mild tap to a serious slam. The removable tip accepts drywall screws, giving you whatever depth and thread you need.

View Cart | Top